Channel Brackets & Channel Lengths Supplier, Greenaways UK

All our channel brackets and channel lengths are manufactured in accordance with BS6946:1988.
Our channel lengths are available in 3m and 6m lengths, in plain or slotted profile, back-to-back profile and both.
Other lengths are available, cut to order.
Standard gauge – 2.5mm
Light gauge – 1.5mm
Pre-galv finish, full end slots on all sections.
Full-loading tables are available for comprehensive analysis.
All channel brackets are manufactured in accordance with BS6946:1988, 6mm thick HDG finish except where specified.
End caps and closure strips are available to suit all channel profiles.

Our channel support system is now certified in accordance with BSI guidelines.

Greenaway Pipeline Products offer a full and comprehensive range of Channel Lengths (Strut) in 3-metre and 6-metre standard lengths to BS6946:1988 (British Standard specification for Metal Channel Cable Support Systems) available as Slotted Channel and Plain channel lengths, Pre Galvanised finish.

Available channel length sizes – 41x21mm, 4x41mm, and 41x82mm (Back-to-Back channel) profiles. These are available in Standard Gauge (2.5mm) and Light Gauge (1.5mm) thickness. Special pre-cut channel lengths are also available to order, along with other finishes. All Slotted Channel length profiles have full end slots (Standard lengths only).

- Channel Brackets & Channel Lengths Range -

Pre-Galv Slotted Channel Lengths – Standard Gauge – 2.5mm Thickness

Pre-Galv Plain Channel Lengths- Standard Gauge – 2.5mm Thickness

Pre-Galv Slotted Channel Lengths – Light Gauge – 1.5mm Thickness

Pre-Galv Plain Channel Lengths- Light Gauge – 1.5mm Thickness

QUICK NUT

DELTA PLATE BRACKET – GALVANISED

145g M10 TAPPED BEAM CLAMP with CONE POINT SET SCREW

5 HOLE CROSSPLATE – GALVANISED

5 HOLE GUSSET ‘T’ BRACKET – GALVANISED

CHANNEL ‘T’ BRACKET – GALVANISED

CANTILEVER ARM – GALVANISED

TOP HAT BRACKET – GALVANISED

EXTERNAL CHANNEL CONNECTORS – GALVANISED

INTERNAL CHANNEL CONNECTORS – With FIXING SCREW – GALVANISED

DOUBLE FIX BASE PLATES – GALVANISED

SINGLE FIX BASE PLATES – GALVANISED

2 PIECE CHANNEL CLAMP – Pre Galv. with Nut & Bolt

SINGLE Z BRACKET – GALVANISED

DOUBLE CHANNEL BASE PLATE – GALVANISED

430g M10 TAPPED BEAM CLAMP with CONE POINT SET SCREW – GALVANISED

120g BEAM CLAMP – GALVANISED

DOUBLE CHANNEL BRACKETS – GALVANISED

DOUBLE WIDE TOP HAT BRACKET – GALVANISED

‘Z’ BEAM CLAMP, M10 TAPPED with 10 DEGREE PITCH – GALVANISED

45 DEGREE OBTUSE ANGLE BRACKET, 2 HOLE – GALVANISED

SHALLOW ‘Z’ BRACKET – GALVANISED

DOUBLE ‘Z’ BRACKET – GALVANISED

M10 ‘C’ BEAM CLAMPS TAPPED with CONE POINT SET SCREW – GALVANISED

2×1 HOLE 90 DEGREE ANGLE BRACKET – GALVANISED

90 DEGREE SMALL DELTA BRACKET – GALVANISED

WELDED SHELF BRACKET – GALVANISED

90 DEGREE LARGE DELTA BRACKET – GALVANISED

2×2 HOLE 90 DEGREE ANGLE BRACKET – GALVANISED

3×1 HOLE 90 DEGREE ANGLE BRACKET – GALVANISED

90 DEGREE ANGLE LEFT HAND T BRACKET – GALVANISED

90 DEGREE ANGLE RIGHT HAND T BRACKET – GALVANISED

22.5 DEGREE OBTUSE ANGLE BRACKET – GALVANISED

M10 BEAM CLAMPS with SQUARE U BOLT AND NUTS – GALVANISED

WINDOW BRACKET with CONE POINT SET SCREW – GALVANISED

15 DEGREE OBTUSE ANGLE BRACKET – GALVANISED

45 DEGREE ACUTE 2 HOLE ANGLE BRACKET – GALVANISED

ACUTE ANGLE 4 HOLE 45 DEGREE ‘T’ BRACKET – GALVANISED

90 DEGREE ANGLE T BRACKET – GALVANISED

SHORT SPRING CHANNEL NUTS – BZP

LONG SPRING CHANNEL NUTS, BZP

SQUARE PLATE WASHERS – BZP

2 HOLE FLAT PLATE BRACKET – GALVANISED

3 HOLE FLAT PLATE BRACKET – GALVANISED

4 HOLE FLAT PLATE BRACKET – GALVANISED

5 HOLE FLAT PLATE BRACKET – GALVANISED

FLAT ‘L’ BRACKET – GALVANISED

1×1 HOLE 90 DEGREE ANGLE BRACKET – GALVANISED

Plain BZP Channel Nuts

- How can we help? -

Our support system is complimented by a full range of Channel accessories in 6mm thick profile, Hot Dipped Galvanised (HDG) finish. These products are for use when supporting Pipework and Ducting and can also be used in other framework applications.

Loading tables and Safe Working Load Data can be made available on request. Slip and Pull Out tests have also been carried out in conjunction with BSI guidelines.

Channel lengths are also CE marked. The Channel Bracket range comprises both angle brackets and flat brackets, beam clamps, U shape channel brackets, and Z profile brackets. We supply channel nuts in a choice of Plain, Short Spring and Long Spring alternatives. We also offer Cantilever Arms in various lengths to suit the Channel profile. Our Pipe Support and Pipe Clamp range can be mounted, hung or supported in conjunction with the Channel lengths.

We are also able to source other Channel brackets should you require them.

Channel Brackets and Channel Lengths